Video Wall Conroller with Image Auto
Scaling Function |
|
 |
| Features |
 |
Auto-scaling the image to fit the selected resolution |
| |
Provide 1 image source input (DVI/ Component) and 4 DVI
outputs to four (2 x 2) monitors |
| |
Support various display modes |
| |
Support up to 1920 x 1200 pixel input/output per monitor |
| |
OSD/Remote control functions for
* Display mode selection
* Output resolution selection
* Bezel mask enable/disable and bezel wideness adjustment |
| |
RS-232 communication for remote control |
| |
Easy-to-DIY and setup the video wall display |
 |
| Features |
1. Mode choice
2.Software OSD
3. Remote Control
4. Auto-scaling to fit selected resolution |
| Box Size |
Height：47mm (with rubber foot 53.4mm)
Depth：178.2mm
Width：229.5mm |
| Cooling |
Fanless |
| Front Panel |
6 x LED (1xInput, 4xOutput, 1xPower)
1x 6 keys
1 x IR receiver |
| Rear Panel |
1 x DVI-I input (single link cable)
4 x DVI output (single link cable)
1 x DC Power in
1 x RS-232
8 x Digital I/O |
| Resolution |
| Clone, Vertical Replication, Full and PIP mode |
| Input |
Output |
720x350, 640x400, 720x400,
640x480,
800x 600, 832x624,
1024x768,
1152x864, 1152x 870, 1152x900, 1280x768, 1280x960,
1280x 1024, 1600x1200, 1680x1050, 1920x1200, 480i/p(720 x480),
720i/p(1280x720), 1080i/p(1920x1080) |
1024x768, 1360x768, 1280x1024, 1400x1050, 1680x1050, 1600x1200, 1920x1200 |
|
| Power Consumption |
20W |
| Power Connector |
DC Power Jack |
| OSD |
1. Power On/Off
2. Output resolution selection
3. Display mode selection
4. Input source selection
5. Mask control
6. Bezel wideness adjustment |
| Temperature |
0°C~40°C |
| Safety & Emission |
Meet UL, CE, FCC and CCC |
| Power Adapter Input |
90VAC to 264VAC / 47Hz to 63Hz |
| Power Adapter Output |
11.52V to 12.48V, 2.1A, 25W |
|
VWBOX-E122-R10
|
Video Wall Control Box, 1 x DVI Input, 1 x Component Input, 4 x DVI Output, 2 by 2 display |
VWBOX-E122/DVI-R10
|
Video Wall Control Box, 1 x DVI Input, 4 x DVI Output, 2 by 2 display |
|
|
 |
|
|
