Dimming knob control backlight brightness from nearly 0% to 100%
Transflective film technology enhance visibility
Panel (flush) mount IP65 aluminum housing with powder coating design (IP54 rear)
8 to 36V DC to DC power input acceptable
High quality touchscreen / AR protection glass for option
PIP(picture in picture) function and multi-video inputs
Ease of use front panel OSD control
Enhanced shock and vibration resistance
Specifications
TFT Characteristics
Pixel Number
800 x 600
Pixel Pitch (RGB)
0.264 (H) x 0.264 (V) mm
Contrast Ratio
500 : 1(typ.)
Light Intensity
560 cd/m2 (typ.)
Viewing Angles
-70~70 (H);-60~50 (V)
Active Display Area
211.2(H) x 158.4(V) mm
Max Colors
16.7M (8bits/color)
Input Signals
RGB Signal
D-SUB 15P connector(female)
Composite Video
RCA phono plug
S-Video Signal
S-Video (SVHS) plug
DC Power Signal
Screw terminal block
Touch Screen (Optional)
D-SUB 9P connector (female)
Remote via RS-232 (Optional)
D-SUB 9P connector (female)
User Controls
Power Control
Power On/Off via Front Button
VR Control
VR Brightness Knob Control
Display Control
On Screen Display control(OSD)
OSD Remote Control
OSD Remote Control via RS-232
LED indicators
Power Mode Status LED
Power Specifications
Power Supply Options
8 to 36 V DC to DC power supply with terminal block
Power Consumption
21 W typical, normal operation
Environmental Considerations
Operating Temperature
-10 to 55 deg.C (-20 to 60 deg.C for optional heating)
Operating Humidity
5% to 95% (non condensing)
Anti-Vibration
5Hz~500Hz / 1Grms/3 Axis
Anti Shock
15G, 11ms duraiton
Available Options
Mechanical Options
Panel (Flush) mount with IP65 (SAW touch for IP54)
Touch Screen Options
SAW, 5 Wire Resistive
AR Safety Glass Option
3mm Anti-reflective protection glass
Certification and Approvals
Certification
CE, FCC
Approvals
DNV Type Approval (Pending)
Outdoor Readability
Ambient light(nit)
10,000
30,000
80,000
Brightness gain (nit)
437.5
670
1,150
Reflectance(net)(%)
1.20%
1.15%
1.10%
Note
*Equivalent brightness under sunlight.
*Due to Panel material's deviation, different panel supplier will set different specific variance range to optical characteristics. The factors of time used, Lamp current, Ambient temperature will influence the optical measurements.
