| Specifications |
| General
Functions |
| CPU |
NS Geode GXLV/GX1 166/233/300/333 MMX CPU, GXLV support
low-power 0~85XC CPU (1.5~5.4W), GX1 support very low-power
0~85XC CPU (0.8~3W) |
| Memory |
1 x 144-pin SO-DIMM socket on solder
side support 8MB ~ 128MB SDRAM |
| Chipset |
GX5530A chipset |
| Cache
Memory |
16KB L1 cache memory |
| I/O Chipset |
NS PC97317
|
| BIOS |
Award BIOS, 128KB (Flash) EPROM |
| LCD/VGA w/ MPEG II |
SMA 64-bit TFT LCD/CRT, support CRT and 18-bit TFT
LCD flat panel up to 1280 x 1024 x 8 BPP and 1024 x768
x 16 BPP, support MPEG1 and MPEG2 assist, 41-pin LCD connector |
| DSTN signal |
for optional DSTN board |
| Audio signal |
for optional Audio daughter board |
| USB |
USB Pin header x 2 |
| IrDA |
Pin header |
| DOC socket |
Socket for DiskOnChip™ Flash Disk |
| Speaker |
Buzzer on Board |
| CMOS Backup |
Backup by Li battery |
| PS/2 Keyboard |
5-pin header |
| PS/2 Mouse |
5-pin header |
| IDE Interface |
Support one port up to 2 x IDE devices |
| FDD |
Two 3 1/2" or 5 1/4" FDD, Drives A, B swappable |
| Parallel Port |
One bi-directional SPP/EPP/ECP parallel port configured
as LPT1,2,3 |
| Serial Port |
16-byte FIFO 16C550 serial port jumper selectable RS-232
x 1 + RS-232/422/485 x 1 |
| Watchdog Timer |
Programmable 0 ~ 30 sec |
| Miscellaneous Connectors/Jumpers |
Reset, HDD LED, 2-pin/3-pin single +5V power connector
|
| Optional |
| NC-890 |
 |
|
| Environmental
and Mechanical |
| Power Consumption |
Single +5V power by using 4-pin FDD type power connector |
| Operating
Temperature |
0 ~ 60XC. 0 ~ 85XC low-power CPU
just need metal cooler |
| Form Factor |
PC/104 Plus |
| Dimensions |
95 x 90 mm |
