|
3.5” SBC with on-board Intel® Celeron® Dual-core 1007U 1.5GHz Processor, DDR3, VGA/LVDS, Dual GbE, USB 2.0, mSATA, SATA 3GB/s and Audio |
|
 |
Features |
|
3.5” SBC with on-board 32nm 1.5GHz Intel® Celeron® 1007U dual-core mobile processor |
|
VGA and LVDS support dual display |
|
One 204-pin 1333/1600MHz DDR3 SO-DIMM supports up to 8GB memory |
|
Easy fanless thermal design by assembling heat spreader on system chassis |
 |
Supports four COM, six USB 2.0, two SATA 3Gb/s, one mSATA and audio |
 |
One Key Recovery solution allows you to create rapid OS backup and recovery |
 |
CPU |
On-board 32nm 1.5GHz Intel® Celeron® 1007U dual-core mobile processor |
PCH |
Intel® NM70 |
BIOS |
UEFI BIOS |
System Memory |
One 204-pins 1333/1600 DDR3 SO-DIMM supported (system max. 8GB) |
Ethernet |
Dual PCIe GbE by Realtek RTL8111E controller with ASF 2.0 support |
I/O Interface |
2 x USB 2.0 (on rear)/ 2 x SATA 3Gb/s with SATA 5V power connector/ 4 x USB 2.0 (by pin header)/ 1 x 6-pin wafer for PS/2 KB/MS/ 1 x RS-422/485 (by pin header)/ 3 x RS-232 (1 on rear, 2 by pin header) |
Digital I/O |
8-bit digitial I/O (4-bit input/ 4-bit output) |
Super I/O |
Fintek F81867 |
SMBus |
1 x 4-pin (1x4) wafer |
Audio |
Realtek ALC662 HDA codec (Line-in, Line-out, Mic) |
Display Interfaces |
Dual independent display support/ VGA integrated in NM70 (2048x1536@75MHz)/ Dual channel 24-bit LVDS integrated in NM70 (1920x1600@60MHz) |
Expansion |
1 x Full/Half-size PCIe Mini card slot with mSATA support |
Watchdog Timer |
Software programmable support 1~255 sec. System reset |
Power Supply |
12V only, AT/ATX support |
Power Consumption |
12V@2.72A (Intel® mobile Celeron® 1007U 1.5GHz processor with 1333MHz 8GB/ DDR3 memory) |
Graphic |
Intel® HD Graphics Gen 6 support for DX10.1 and OpenGL 3.0/ Full MPEG2, VC1, AVC Decode |
Operating Temperature |
Operating Temperature : -10°C ~ 60°C/ Storage Temperature: -20°C ~ 85°C |
Humidity |
5% ~95%, non-condensing |
Dimensions |
146 mm x 102 mm |
Weight |
GW:600g / NW:250g |
Front Panel |
1 x 10-pin (1x10) header |
Fan Connector |
1 x 4-pin CPU fan connector 1 x 3-pin system fan connector (smart fan support) |
 |
WAFER-NM701-1007U-R10 |
3.5” SBC with on-board Intel® Celeron® Dual-core 1007U 1.5GHz Processor, DDR3, VGA/LVDS, Dual GbE, USB 2.0, mSATA, SATA 3GB/s and Audio |
32000-044300-RS |
Dual port USB cable |
32205-003800-100-RS |
RS-422/485 cable, 200mm |
32200-000049-RS |
RS-232 cable, 200mm, pitch 2.0mm |
1 * WAFER-NM701-1007U single board computer |
2 * Plastic shaft for securing half-size PCIe Mini card (P/N:43124-0010C2-01-RS) |
1 * PS/2 KB/MS Y-cable (P/N:32006-001100-100-RS) |
2 * SATA with power cable kit (P/N:32801-000201-100-RS)) |
1 * Audio cable (P/N:32007-002600-100-RS) |
1 * Power cable (P/N:32100-087100-RS) |
1 * RS-232 cable (P/N:32200-000049-RS) |
1 * QIG (Quick Installation Guide) |
1 * Heat spreader |
1 * One Key Recovery CD |
1 * Mini jumper pack |
1 * Utility CD |
|
|
 |
|
|
|