Google ATTRO website www
 
   
 
 
Single Board Computer
Industrial Motherboard
Embedded Little Board
Fanless Embedded PC
Industrial Panel PC
Industrial Display Panel
Server Chassis
Industrial Backplane
Industrial Power Supply
Digital Signage
Network Communication
Video Surveillance
Peripherals
CPU Cooling Fan
Solid State Disk
Compact Drive Bay
PCMCIA Drives
Riser Card
Add-on Card
Others
       

ISA Bus Drives PCI Bus Card Drives Card Master-ATA To IDE
PC Card Drives
PC-104 Module
PC-104 Bus Drives

ATA To IDE Interface PC Card Drives
Card Master-ATA IDE/F
ATA to standard IDE interface

1 front slot
40 Pins IDE and 4 Pins Power Connectors
Support Type I/II/III ATA Flash, ATA HDD, Compact Flash Cards(an adaptor required)
Standard 3.5" Drive form factor
Power Consumption: 5V, 70 mA Typical
Operating Temperature: 0XC - 70XC
Card Master-ATA IDE/R
ATA to standard IDE interface

1 real slot

40 Pins IDE and 4 Pins Power Connectors
Support Type I/II/III ATA Flash, ATA HDD, Compact Flash Cards(an adaptor required)
1/2 size interface card form factor
Power Consumption: 5V, 70 mA Typical
Operating Temperature: 0XC - 70XC
Card Master-IDE-112/F
ATA to standard IDE interface

1 front slot
40 Pins IDE and 4 Pins Power Connectors
Standard 3.5" Drive form factor
With card protection function by Hardware circuit
Card Master-IDE-112/R
ATA to standard IDE interface

1 front slot
40 Pins IDE and 4 Pins Power Connectors
Standard 3.5" Drive form factor
With card protection function by Hardware circuit
Card Master-IDE-211/F
ATA to standard IDE interface

2 front slots

40 Pins IDE and 4 Pins Power Connectors
Standard 3.5" Drive form factor
With card protection function by Hardware circuit
Card Master-IDE-211/R
ATA to standard IDE interface

2 rear slots
40 Pins IDE and 4 Pins Power Connectors
With card protection function by Hardware circuit
Card Master-IDE-310
2 in 1, combines one FDD with one IDE Drive

Standard 34 pins FDD and 4 pins power connector
ATA to standard IDE interface
1 front slot
  40 pins IDE and 4 pins power connector
Standard 3.5" Driver form factor
Card Master-IDE-412.HS
ATA to standard IDE interface

1 front slot
40 Pins IDE and 4 Pins Power Connectors
Support Type I/II/III ATA Flash, ATA HDD, Compact Flash Cards(an adaptor required)
5V, 70mA power consumption (typical)
Can be mounted on 3.5" Drive bay
  Dimensions: 109.6 x 101.6 x 25.4mm

With special design hardware circuit support " Hot Swap " function
Card Master-IDE-421.HS
ATA to standard IDE interface

2 front slots
40 pins IDE and 4 pins power connectors
Supports Type I / II / III ATA Flash, ATA HDD and Type I Compact Flash Cards through 68-pin PCMCIA connector & 50-pin Compact Flash connector
5V, 70mA power consumption. (typical)
Can be mounted on 3.5" Drive bay
Dimensions: 109.6 x 101.6 x 25.4mm

With " Hot Swap " software
Card Master-IDE-611/F.HS
ATA to standard IDE interface

1 front slot
40 pins IDE and 4 pins power connectors
Standard 3.5" Drive form factor
With special design hardware circuit support Hot Swap Function

With "Hot Swap" software
Card Master-IDE-611/R.HS
ATA to standard IDE interface

1 rear slot
40 pins IDE and 4 pins power connectors
Support Type I/II/III ATA Flash Cards, ATA HDD, Compact Flash Card
With special design hardware circuit support Hot Swap Function
With "Hot Swap" software

5V 70mA power consumption
Card Master-IDE-215/F.HS
ATA to standard IDE interface

2 front slots
40 pins IDE and 4 pins power connectors
Standard 3.5" Drive form factor
With Hot Swap Software under operation system. DOS, Win98/Me/2000/XP
With card protection function by Hardware circuit
Card Master-IDE-215 / R.HS
ATA to standard IDE interface

2 rear slots
40 pins IDE and 4 pins power connectors
Support Type I/II/III ATA Flash Cards, ATA HDD, Compact Flash Card
With special design hardware circuit support Hot Swap function
With "Hot Swap" software

5V 70mA power consumption
ATA To IDE Interface PC-104 Module
PCM-212 ATA
ATA to standard IDE interface

1 slot for 68 Pins ATA
40 Pins IDE and 4 Pins Power Connectors
Support Type I/II/III ATA Flash, ATA HDD, Compact Flash Cards(an adaptor required)
Standard PC-104 form factor
Power Consumption: 5V, 70 mA Typical
Operating Temperature: 0XC - 70XC
PCM-212 C.F.
ATA to standard IDE interface

1 slot for 50 Pins C.F. Cards
40 Pins IDE and 4 Pins Power Connectors
Support Compact Flash Cards
Standard PC-104 form factor
Power Consumption: 5V, 70 mA Typical
Operating Temperature: 0XC - 70XC
PCM-212 C.F.II
ATA to standard IDE interface

1 slot for 50 Pins C.F. Cards

40 Pins IDE and 4 Pins Power Connectors
Support Compact Flash Cards Type I/II
Standard PC-104 form factor
Power Consumption: 5V, 70 mA Typical
Operating Temperature: 0XC - 70XC
PCM-213
PCMCIA (ATA) and compact flash (ATA) to standard IDE interface

1slot for 68 pins ATA and slot for 50 pins C.F. Cards
40 Pins IDE and 4 Pins Power Connectors
Support TYPE I/II/III ATA Flash, ATA HDD, Compact Flash cards
Standard PC-104 form factor
Power Consumption: 5V, 70 mA Typical
   

Copyright © 2016 ATTRO Technology Inc. All Rights Reserved.