| Specifications |
| Chipset |
 |
Intel® chipset
- Intel® 945GM Express chipset
- Intel® 82801GR I/O Controller Hub (ICH7M) |
|
| System Memory |
|
One 240-pin DDR2 DIMM socket |
|
Supports 400MHz, 533MHz and 667MHz DDR2 SDRAM |
|
Supports maximum of 2GB system memory using 256Mbit, 512Mbit or 1Gbit technology for x8 and x16 devices |
|
| BIOS |
|
Award BIOS |
|
4Mbit flash memory |
|
| Power Management |
|
Supports ACPI specification and OS Directed Power Management |
|
Supports ACPI STR (Suspend to RAM) function |
|
Wake-On-Events include:
-Wake-On-PS/2 Keyboard/Mouse
-Wake-On-USB Keyboard/Mouse
-Wake-On-LAN
-Wake-On-Ring
-RTC timer to power-on the system |
|
System power management supported |
|
Microsoft®/Intel® APM 1.2 compliant |
|
Soft Power supported - ACPI v1.0a specification |
|
AC power failure recovery |
|
| Hardware
Monitor |
|
Monitors CPU/system temperature and overheat alarm |
|
Monitors CPU(V)/1.05V/1.5V/dimm(v)/12V/VBAT(V)/3.3V/V3.3sb(v) voltages and failure alarm |
|
Monitors CPU/chassis fan speed and failure alarm |
|
Read back capability that displays temperature,
voltage and fan speed |
|
Watchdog timer function |
|
| Audio |
|
Realtek ALC655
AC'97 audio CODEC |
|
16-bit stereo full-duplex CODEC with 48KHz sampling rate |
|
High quality differential CD input |
|
S/PDIF-in/out interface |
|
5.1-channel audio output |
|
| LAN |
|
One Realtek RTL8111B PCI Express Gigabit controllers |
|
Supports 10Mbps, 100Mbps and 1Gbps data transmission |
|
IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)compliant
|
|
| Processor Socket |
|
Intel® Core Duo/Solo mobile processor |
|
Intel® Core 2 Duo mobile processor |
|
Intel® Core processor-based Celeron® M 65nm mobile processor - 667MHz/533MHz Front Side Bus |
|
Processor socket:mPGA478 |
|
| Graphics |
|
Integrated Intel Graphics Media Accelerator 950
- 250MHz core render clock and 200MHz core display clock
- Up to 224 MB maximum video memory
- 2048x1536 maximum resolution |
|
| Serial
ATA |
|
Supports four SATA (Serial ATA) interfaces which
are compliant with SATA 1.0
specification (1.5Gbps interface) |
|
SATA speed up to 3Gb/s |
|
| IDE |
|
One IDE connector supports up to two IDE devices |
|
Supports Ultra ATA 100/66/33 |
|
| Rear Panel I/O
Ports |
|
1 mini-DIN-6 PS/2 mouse port |
|
1 mini-DIN-6 PS/2 keyboard port |
|
1 DB-9 serial port |
|
1 DB-15 VGA port |
|
1 RJ45 LAN port |
|
4 USB 2.0/1.1 ports |
|
Mic-in, line-in and line-out |
|
| I/O Connectors |
|
1 connector for 2 additional external USB 2.0/1.1 ports |
|
1 DIO connector |
|
1 parallel connector |
|
1 connector for an external serial port |
|
1 front audio connector for line-out and mic-in jacks |
|
1 CD-in internal audio connector |
|
1 S/PDIF-in/out connector |
|
1 connector for IrDA interface |
|
2 Serial ATA connectors |
|
1 40-pin IDE connector |
|
1 floppy connector |
|
1 20-pin ATX power connector |
|
1 chassis open connector |
|
1 front panel connector |
|
2 fan connectors |
|
| Expansion Slots |
|
1 PCI Express x16 slot |
|
1 PCI Express x1 slot |
|
1 PCI slot |
|
| PCB |
|
8 layers, Mini-ITX form factor |
|
17cm(6.7") x 17cm(6.7") |
|
