| Specifications |
| General
Functions |
| CPU |
 |
Intel® Pentium® 4 processor
- Hyper-Threading Technology
- 800MHz/533MHz system data bus |
|
Intel® Celeron® D processor
- 533MHz system data bus
- Based on 90 nm core |
|
Processor socket: Socket 478
|
|
| Chipset |
|
IIntel® 915GV chipset
- Intel® 915GV Graphics Memory Controller Hub
(GMCH)
- Intel® 82801FB I/O Controller Hub (ICH6) |
|
| System Memory |
|
Two 184-pin DDR SDRAM DIMM sockets |
|
Supports dual channel (128-bit
wide) memory interface |
|
2.6V unbuffered PC3200 (DDR400)
or PC2700 (DDR333) DDR SDRAM DIMM |
|
Supports maximum of 2GB system
memory using 256Mbit, 512Mbit or 1Gbit technology
for x8 and x16 devices |
|
| BIOS |
|
Award BIOS |
|
4Mbit flash memory |
|
| Power Management |
|
Supports ACPI specification and
OS Directed Power Management |
|
Supports ACPI STR (Suspend to
RAM) function |
|
Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system |
|
System power management supported |
|
CPU stopped clock control |
|
Hardware supports SMI green mode |
|
Microsoft®/Intel® APM
1.2 compliant |
|
Soft Power supported - ACPI v1.0a
specification |
|
AC power failure recovery |
|
| Hardware
Monitor |
|
Monitors CPU/system temperature
and overheat alarm |
|
Monitors Vcore, VccP, VccI/O
voltages and failure alarm |
|
Monitors CPU/system fan speed
and failure alarm |
|
Read back capability that displays
temperature, voltage and fan speed |
|
Watchdog timer function |
|
Audio
|
|
Realtek ALC202A |
|
18-bit stereo full-duplex codec
with independent variable sampling rate |
|
High quality differential CD
input |
|
True stereo line level outputs |
|
S/PDIF-in/out interface |
|
2-channel audio output |
|
Speaker-out jack supports 2W
amplifier providing better audio quality to the
headphone or speakers |
|
| LAN |
|
Two Marvell 88E8053 PCI Express
Gigabit ethernet controllers that support 2 LAN
ports |
|
Integrated power
management functions |
|
IFull duplex support at both
10 Mbps, 100 Mbps and 1Gbps |
|
Supports IEEE 802.3u auto-negotiation |
|
Supports wire for management
|
|
| Graphics |
|
Graphics memory
- Shares 1MB/8MB of the system memory in DOS mode
- Uses Dynamic Video Memory Technology (DVMT) in
Windows mode |
|
Graphics controller
- Core frequency of 333MHz
- 400MHz integrated 24-bit RAMDAC
- Analog display up to 2048x1536 @ 85Hz refresh
- High quality 3D setup and render engine - Discrete,
Triangles, Strips and fans
- Hardware Pixel Shader 2.0
- Supports D3D and OGL pixelization rules
- Per pixel perspective corrected texture mapping
- 533 MegaTexel/sec performance, 266 Mpixels/sec
fill rate up to two bilinear textures |
|
2D graphics features
- Optimized 256-bit BLT engine
- 32-bit alpha blended cursor
- Programmable 3-color transparent cursor |
|
3D graphics features
- Supports maximum 3D resolution: 1600x1200x32 @
85Hz
- Flat and Gouraud shading
- 16- and 24-bit Z-buffering and 8-bit Stencil buffering
- Vertex and programmable pixel fog and atmospheric
effects
- Supports Double and triple render buffer |
|
Software drivers
- Windows® 2000/XP |
|
| Serial
ATA |
|
Supports four SATA (Serial ATA)
interfaces which are compliant with SATA 1.0 specification
(1.5Gbps interface) |
|
| IDE |
|
Supports up to UltraDMA 100Mbps
hard drives |
|
PIO Mode 4 Enhanced IDE (data
transfer rate up to 14MB/sec.) |
|
| Rear Panel
I/O Ports |
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
3 DB-9 serial ports
1 DB-15 VGA port
2 RJ45 LAN ports
4 USB 2.0/1.1 ports
Speaker-out, line-in and mic-in |
| I/O Connectors |
2 connectors for 4 additional external USB 2.0/1.1 ports
1 connector for external COM 3
1 connector for external parallel port
1 front audio connector for speaker-out and mic-in jacks
1 CD-in internal audio connector
1 S/PDIF-out connector
1 connector for IrDA interface
1 40-pin IDE connector
1 floppy connector (FPC connector type)
2 ATX 12V power supply connectors
1 chassis open connector
3 fan connectors |
| Expansion
Slots |
|
1 PCI slot for PCI expansion
card or customized riser card slot for 1, 2 or 3
PCI slots expansion (for low profile PCI card only)
|
|
Compatibility
|
PCI 2.2 and AC'97 compliant |
| PCB |
6 layers, Mini-ITX form factor
17cm (6.7") x 17cm (6.7") |
