Google ATTRO website www
Intel Xeon
AMD Socket AM2/S1
LGA1150 i7 / i5 / i3
LGA1155 i7 / i5 / i3
LGA1156 i7 / i5 / i3
Intel Mobile CPU
Socket LGA775
Socket 479
P4 Socket 478
PIII Socket 370
Embedded CPU

Socket 479, Pentium M / Celeron M, DDR400, Graphics, LVDS, 5.1-channel audio, 2 SATA, Gigabit LAN, 4 COM, 8 USB 2.0, Digital I/O and 1 PCI slot for customized riser card

General Functions
Intel Pentium M processor
- 533MHz/400MHz system data bus
Intel Celeron M processor
- 400MHz system data bus
Processor socket: mPGA479M
Intel 915GM chipset
- Intel 915GM Graphics Memory Controller Hub (GMCH)
- Intel 82801FBM I/O Controller Hub (ICH6M)
System Memory
Two 184-pin DDR SDRAM DIMM sockets
Supports single channel (64-bit wide) memory interface
Unbuffered PC3200 (DDR400) or PC2700 (DDR333) DDR SDRAM DIMM
Supports maximum of 2GB system memory using 256Mbit, 512Mbit or 1Gbit technology for x8 and x16 devices, non-ECC memory
Award BIOS
4Mbit flash memory
Power Management
Supports ACPI specification and OS Directed Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system
System power management supported
CPU stopped clock control
Microsoft®/Intel® APM 1.2 compliant
Soft Power supported - ACPI v1.0a specification
AC power failure recovery
Hardware Monitor
Monitors CPU/system temperature and overheat alarm
Monitors CPU(V), +1.5V, +3.3V, +5V, +12V, -12V, VBAT(V) and 5VSB(V) voltages and failure alarm
Monitors CPU/chassis/2nd fan speed and failure alarm
Read back capability that displays temperature, voltage and fan speed
Watchdog timer function
Realtek ALC655
18-bit stereo full-duplex codec with independent variable sampling rate
High quality differential CD input
True stereo line level outputs
S/PDIF-in/out interface
5.1-channel audio output
RTL8110SB Gigabit ethernet controller
Supports 10Mbps, 100Mbps and 1Gbps data transmission
IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
Integrated display interface
- Analog CRT DAC interface support
- Supports max DAC frequency up to 400MHz
- 24-bit RAMDAC support
- Up to 2048x1536 mode support
- Digital LVDS interface support
- Integrated dual channel LVDS interface support
- Supports 25 to 112MHz single/dual channel LVDS interface
- Single channel LVDS interface support: 1 x 18 bpp
- Dual channel LVDS interface support: 2 x 18 bpp
Internal graphics features
- DVMT 3.0 support
- 1MB or 8MB of pre-allocated memory supported
- Intel Dual-Frequency Graphics Technology
High quality 3D setup and render engine
High quality texture engine
3D graphics rendering enhancements
Serial ATA
Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface)
Supports up to UltraDMA 100Mbps hard drives
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)
Rear Panel I/O Ports 1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
3 DB-9 serial ports
1 DB-15 VGA port
1 RJ45 LAN port
4 USB 2.0/1.1 ports
Mic-in, line-in and line-out
I/O Connectors 2 connectors for 4 additional external USB 2.0/1.1 ports
1 connector for 1 external serial port
1 LCD brightness control connector
1 LVDS LCD panel connector
1 LCD/Inverter power connector
1 LCD AUX power connector
1 DIO connector
1 front audio connector for line-out and mic-in jacks
1 CD-in internal audio connector
1 S/PDIF-in/out connector
1 connector for IrDA interface
2 Serial ATA connectors
1 40-pin IDE connector
1 floppy connector (FPC type)
1 20-pin ATX power connector
1 front panel connector
1 chassis open connector
3 fan connectors
Expansion Slots 1 PCI slot for PCI expansion card or customized riser card for 1, 2 or 3 PCI slots expansion (for low profile PCI card only)
Compatibility PCI 2.2 and AC'97 compliant
PCB 6 layers, Mini-ITX form factor
17cm (6.7") x 17cm (6.7")



Copyright © 2016 ATTRO Technology Inc. All Rights Reserved.