| Specifications |
| General
Functions |
| CPU |
 |
Intel Pentium M / Celeron M processor
(478-pin)
- 400MHz system bus
- Supports 64-bit host data bus and 32-bit addressing |
|
| CPU Socket
|
|
mPGA479M (Socket 479) |
|
| Chipset |
|
Intel 855GME chipset
- Intel 855GME Graphics Memory Controller Hub (GMCH)
- Intel 82801DB I/O Controller Hub (ICH4) |
|
| System Memory |
|
Two 184-pin DDR SDRAM DIMM sockets |
|
2.5V unbuffered PC1600 (DDR200),
PC2100 (DDR266) or PC2700 (DDR333) DDR SDRAM DIMM
with ECC support |
|
Supports 128Mbit, 256Mbit and
512Mbit technologies providing maximum capacity
of 1GB with x16 devices and up to 2GB with high
density 512Mbit technology |
|
| BIOS |
|
Award BIOS, Windows® 98SE/2000/ME/XP
Plug and Play compatible |
|
4Mbit flash memory |
|
| Power Management |
|
Supports ACPI STR (Suspend to
RAM) function |
|
Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB
- Wake-On-LAN
- RTC timer to power-on the system |
|
AC power failure recovery |
|
| Hardware Monitor |
|
Monitors CPU/system temperature
and overheat alarm |
|
Monitors 5VSB(V)/VBAT(V)/1.5V/3.3V/5V/12V/CPU(V)
voltages and failure alarm |
|
Monitors CPU/chassis/2nd fan
speed and failure alarm |
|
Read back capability that displays
temperature, voltage and fan speed |
|
Watchdog timer function |
|
Audio
|
|
Realtek ALC202A |
|
18-bit stereo full-duplex codec
with independent variable sampling rate |
|
High quality differential CD
input |
|
| LAN |
|
Intel 82562EM fast ethernet controller
- Basic 10/100 Client Connection
- IEEE 802.3, 10BASE-T/100BASE-TX compliant physical
layer interface
- IEEE 802.3u Auto-Negotiation
- 48-pin SSOP, 3.3V device |
|
Intel 82551QM fast
ethernet controller
- Integrated IEEE 802.3, 10BASE-T and 100BASE-TX
compatible PHY
- Glueless 32-bit PCI master interface
- Glueless CardBus master interface
- 128 Kbyte Flash interface
- Thin BGA 15 mm2 package |
|
| Graphics |
|
Up to 64MB of dynamic video memory
allocation |
|
Display core frequency at 133/200/250MHz |
|
Render core frequency at 100/133/166/200/250MHz |
|
Intel® Dual-Frequency Graphics
Technology |
|
2D graphics engine
- Optimized 128-bit BLT engine
- 32-bit Alpha Blended cursor
- 8-bit, 16-bit and 32-bit color |
|
3D graphics engine
- Enhanced Hardware Binning Instruction Set
- Bi-Cubic Filtering
- Linear Gamma Blending for Video Mixer Rendering
(VMR)
- Video Mixer Rendering (VMR)
- 3D setup and render engine
- DirectX and OpenGL pixelization rules
- 266-MegaTexel/s peak performance
- 16- and 24-bit Z-buffering; 16- and 24-bit W-buf
- Optimal 3D resolution
- Double and triple render buffer |
|
Graphics Power Management
- Dynamic Frequency Switching
- Memory Self-Refresh During C3
- Intel® Display Power Saving Technology |
|
| Display |
|
Dedicated LFP (Local Flat Panel)
interface
- Supports data format up to 24-bpp |
|
Analog display
- 350MHz integrated 24-bit RAMDAC
- Pixel resolution up to 1600x1200 at 85Hz and up
to 2048x1536 at 75Hz |
|
| LFP (Local Flat Panel) LVDS
Interface |
|
Single- or dual-channel LVDS
panel support up to UXGA panel resolution with frequency
range from 25MHz to 112MHz (single/dual channel) |
|
Integrated PWM interface for
LCD backlight inverter control |
|
| IDE |
|
Supports ATA/33, ATA/66 and ATA/100
hard drives |
|
PIO Mode 4 Enhanced IDE (data
transfer rate up to 14MB/sec.) |
|
Bus mastering reduces CPU utilization
during disk transfer |
|
Supports ATAPI CD-ROM, LS-120
and ZIP |
|
| Rear Panel I/O Ports |
4 USB 2.0/1.1 ports
2 RJ45 LAN ports
3 DB-9 serial ports
1 DB-15 VGA port
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
3 audio jacks: speaker-out, line-in and mic-in |
| I/O Connectors |
1 connector for 2 additional external USB 2.0/1.1 ports
1 connector for LCD brightness control
1 connector for LVDS LCD panel
1 connector for LCD power
1 front audio connector for line-out and mic-in jacks
1 CD-in internal audio connector
1 S/PDIF-out connector
1 connector for IrDA interface
1 44-pin IDE 2 connector for 2.5" HDD
1 40-pin IDE 1 connector for 3.5" HDD
1 floppy connector (FPC connector type)
1 ATX power supply connector
1 Wake-On-LAN connector
3 fan connectors |
| Expansion Slots |
|
1 PCI slot for PCI expansion
card or customized riser card slot for 1, 2 or 3
PCI slots expansion (for low profile PCI card only)
|
|
1 mini PCI socket (124-pin) |
|
Compatibility
|
PCI 2.2 and AC97 compliant |
| PCB |
6 layers, mini board (Mini-ITX compatible)
17cm (6.7") x 17cm (6.7") |
