Specifications |
Chipset |
Intel® chipset
- North bridge: Intel® 945G Express chipset
- South bridge: Intel® ICH7R |
System Memory |
- Four 240-pin DDR2 DIMM sockets
- Supports DDR2 533 and DDR2 667 DIMMs
- Supports dual channel (128-bit wide) memory interface
- Supports up to 4GB system memory
- Supports non-ECC x8 and x16 DIMMs
- Supports up to 1Gb DRAM densities
-
Supports unbuffered DIMMs |
BIOS |
- AMI BIOS
-
8Mbit flash memory |
Power Management |
- Supports ACPI specificationand and OS Directed Power Management
-
Supports ACPI STR (Suspend to RAM) function
-
Wake-On-Events include:
a) Wake-On-PS/2 Keyboard/Mouse
b)
Wake-On-USB Keyboard/Mouse
c)
Wake-On-LAN
d) Wake-On-Ring
e)
RTC timer to power-on the system
- System power management supported
-
CPU stopped clock control
-
Microsoft®/Intel® APM 1.2 compliant
-
Soft Power supported - ACPI v2.0 specification
- AC power failure recovery |
Hardware Monitor |
- Monitors CPU/system temperature and overheat alarm
-
Monitors Vcore/VCC3/VBAT/3VSB/12V/1.5V/1.8V/5V voltages and failure alarm
-
Monitors CPU/system fan speed and failure alarm
-
Read back capability that displays temperature, voltage and fan speed
-
Watchdog timer function |
Audio |
- Realtek ALC662 5.1-channel High Definition Audio CODEC
- Six channel DAC support 16/20/24-bit PCM format for 5.1 channel audio solution
- Two stereo ADC support 16/20-bit PCM format
- All DAC/ADC support independent 44.1k/48k/96kHz sample rate
- 44.1k/48k/96kHz S/PDIF-out interface |
LAN |
- Two Realtek RTL8111B PCI Express Gigabit controllers
- Supports 10Mbps, 100Mbps and 1Gbps data transmission
- IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)
compliant |
Processor Socket |
LGA 775 socket for:
- Intel® CoreTM2 Duo
- Intel® Pentium® D
- Intel® Pentium® 4 or Intel® Celeron
- Intel® Celeron D
Supports Intel Enhanced Memory 64 Technology (EMT64T)
Supports Enhanced Intel SpeedStep Technology (EIST)
Supports Intel Hyper-Threading Technology
Supports 1066/800/533MHz FSB |
Graphics |
Integrated Intel Graphics Media Accelerator 950 |
Serial ATA |
- Supports four SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification
- SATA speed up to 3Gb/s
- RAID 0, RAID 1, RAID 0+1 and RAID 5 |
IDE |
- Supports up to UltraDMA 100Mbps hard drives
- Supports PIO IDE transfers up to 16MB/sec |
Rear Panel I/O Ports |
- 1 mini-DIN-6 PS/2 mouse port
- 1 mini-DIN-6 PS/2 keyboard port
- 1 DB-25 parallel port
- 1 DB-9 serial port
- 1 DB-15 VGA port
- 2 RJ45 LAN ports
- 4 USB 2.0/1.1 ports
- Line-in, line-out and mic-in |
I/O Connectors |
- 2 connectors for 4 additional external USB 2.0/1.1 ports
- 1 connector for an external COM 2 port
- 1 Digital I/O connector
- 1 front audio connector for line-out and mic-in jacks
- 1 CD-in internal audio connector
-
1 S/PDIF-out connector
-
1 connector for IrDA interface
-
4 Serial ATA connectors
-
1 40-pin IDE connector
-
1 floppy connector
-
1 chassis open connector
-
1 24-pin ATX power connector
-
1 4-pin 12V power connector
-
1 front panel connector
- 3 fan connectors |
Expansion Slots |
- 1 PCI Express x16 slot
- 6 PCI slots |
PCB |
- 4 layers, ATX form factor
- 30.5cm (12") x 24.4cm (9.6")
|