Google ATTRO website www
 
   
 
Intel Xeon
AMD Socket AM2/S1
LGA1150 i7 / i5 / i3
LGA1155 i7 / i5 / i3
LGA1156 i7 / i5 / i3
Intel Mobile CPU
Socket LGA775
Socket 479
P4 Socket 478
PIII Socket 370
Embedded CPU
Mini-ITX
       

MB770

VIA Eden™-V4 CN700-based Mini-ITX Motherboard

 

 

Features Specifications Ordering Info Datasheet

Features
Embedded VIA Eden™-V4/C7™ processor
Up to 2.0GHz, 400MHz/533MHz FSB
1x DDR2 DIMM, Max. 1GB
Integrated VGA, support 18-bit/24-bit dual channel LVDS
10/100 BaseT on board, optional Gigabit LAN
6x USB 2.0, 2x SATA, 4x COM
1 x PCI, 1 x Mini PCI slot, optional TV-out
Specifications
CPU VIA Eden™-V4 / VIA C7™, 400MHz ~ 1.8GHz
Cache 128KB L2 cache, CPU integrated
Chipset VIA CN700 / VT8237R+ Chipset:
North bridge: CN700 / 567-pin HSBGA
South bridge: VT8237R+, 539-pin PBGA
Front Side Bus 400MHz / 533MHz
BIOS

Award BIOS, ACPI supported

System Memory

One DDRII DIMM socket
Supports up to 1GB DDRII SDRAM

VGA VIA CN700 integrated
128-bit Unicrhome Pro 3D/2D controller
Supports 16/32/64MB frame buffer size
DVI ID393 card: VIA VT1632A (with DVI edge connector to be located above the USB stack connector)
LVDS Supported by VIA VT1631L for 18-bit or 24-bit dual channel LVDS
LAN

LAN1: Built-in VT8237R+ 10/100 LAN MAC + VT6103 PHY
LAN2: Optional RTL8110S-32 Gigabit LAN controller (MB770F only)

Audio

VIA VT8237R+ built-in sound controller + AC97 Codec ALC655
5.1 channel (Line-out, Line-in, Mic)

LPC I/O

Winbond W83697HG
COM1, COM2 (RS-232), FDC 1.44MB (Slim), IrDA, Hardware Monitor ( 2 thermal inputs, 6 voltage monitor inputs, 1 chassis open detection, 2 fan headers)

Secondary I/O Fintek F81216D for COM3 / COM4 (RS-232)
USB

6 ports, USB 2.0 ( 4 ports onboard, 2 via pin header)

Serial ATA 2 ports, support RAID 0, 1
IrDA Pin header on board
IDE Interface

Two channels; supports Ultra DMA 33/66/100/133 40-pin box-header x 1 (IDE1), 44-pin header x 1 (IDE2)

FDD Interface Slim type connector supports slim type FDD drives
Watchdog Timer

Generates system reset; 256 levels

Keyboard & Mouse Connector

PS/2 type connectors

Expansion Slot 1 PCI support 2 bus master, Mini PCI slot
Edge Connectors PS/2 Keyboard/Mouse
VGA CRT, COM1
Optional RCA Jack, S-Video for TV out
Optional DVI via ID393
RJ-45 for LAN1 + USBx2 (USB0, 1)
RJ-45 for LAN2
Audio (Speaker, Line in, Mic)
Power Connector

ATX

Form Factor Mini-ITX Motherboard
Dimensions

170mm x 170mm (6.7" x 6.7")

Power Consumption

VIA Eden™-V4 1.0GHz w/ 1GB DDR2
+5V: 2.1A
+12V: 0.77A
+3.3V: 0.83A
+5Vsb: 0.98A


Rear Connectors
Environmental Factors

Operating Temperature 0°C~60°C (32°F~140°F)
Storage Temperature -20°C~80°C (-4°F~176°F)
Relative Humidity 10%~90% (non-condensing)

Ordering Info
MB770-R
VIA Eden™-V4, 400MHz, CN700 chipset, Mini- ITX w/ 10/100 LAN, Mini PCI, SATA
MB770-500
VIA Eden™-V4 500MHz, CN700 chipset, Mini- ITX w/ 10/100 LAN, Mini PCI, SATA
MB770F-R
VIA Eden™-V4 1.0GHz, CN700 chipset, Mini- ITX w/ 10/100, Gigabit LAN, Mini PCI, SATA, TV-out
MB770-C15-R
VIA C7 1.5GHz, CN700 chipset, Mini-ITX w/ 10/100 LAN, Mini PCI, SATA
MB770F-C15-R
(By request w/ MOQ)
VIA C7 1.5GHz, CN700 chipset, Mini-ITX w/ 10/100, Gigabit LAN, Mini PCI, SATA, TV-out
ID393-R Pin Header to DVI board
ID450-R Power interface board
IP115 Riser card with 1x PCI
IP151-R Riser card with 2x PCI
IP340 Riser card with 2x PCI
IP450-R Riser card with 2x PCI
CMI201-60 Chassis for Mini-ITX (low power), w/ 60W PSU, 2.5” HDD holder, 1x PCI-E (optional IP271-R, IP119-R riser & LVDS/DVI ports)
CMI201-85 Chassis for Mini-ITX (low power), w/ 85W PSU, 2.5” HDD holder, 1x PCI-E (optional IP271-R, IP119-R riser & LVDS/DVI ports)
CMI203-180 Chassis for Mini-ITX, w/ 180W PSU, 3.5” HDD holder, 2x PCI-E (optional IP241, IP118-R riser card & iIO LCM)
CMI203-250 Chassis for Mini-ITX, w/ 250W PSU, 3.5” HDD holder, 2x PCI-E (optional IP241, IP118-R riser card & iIO LCM)
 

 

 


Copyright © 2016 ATTRO Technology Inc. All Rights Reserved.