| Specifications |
| General
Functions |
| CPU Socket |
Socket 478 |
CPU Supported
|
Intel® Pentium® 4 / Celeron,
2.0GHz~3.2GHz+
Hyper-Threading supported |
| CPU Voltage |
0.8375V~1.6V (VRD10)
|
| Chipset |
ATI RS300M Chipset
North Bridge: Mobility IGP9180 868-pin, BGA
South Bridge: IXP150 457-pin, BGA |
| Processor Side Bus Frequency |
400/533/800MHz |
| L2 Cache |
128K/256K/512K, CPU integrated
|
| Power Management |
APM 1.2 |
| BIOS |
Award BIOS, ACPI supported
|
| System Memory |
One DDR slots
Supports up to 1GB PC266/333/400 DDR SDRAM
(ECC function not supported)
|
| VGA |
Mobility IGP9180 embedded, AGP 4X, CRT, TV-out, LVDS
VGA CRT and TV-out connectors on board
Supports dual independent view
|
| LAN |
Realtek 8100BL LAN Controller (10/100Mb)
|
| Audio |
IXP150 built-in sound controller with AC97 codec
ALC650 AC3 5.1 CH. (Line-out, Line-in, Mic)
|
| LPC I/O |
Winbond 83627HF supports IrDA x 1, Parallel x 1,
COM1, COM2 (RS232), FDC up to 2.88MB
(3 Mode support), hardware monitoring
|
| Secondary I/O |
Fintek F81216D supports COM3, COM4 (RS232) |
| Keyboard Controller |
Built in Winbond 83627HF |
| IDE Interface |
Built in IXP150, supports Ultra DMA 33/66/100
IDE1: 40 pin pitch 2.54mm
IDE2: 44 pin pitch 2.0mm
|
| FDD Interface |
Supports one 3.5" floppy disk drive
|
| Serial ATA |
SiI3512 , supports 2 ports |
| Digital I/O |
4 in / 4 out |
| Parallel Port
|
One parallel port supports SPP/EPP/ECP |
| Serial Ports |
RS-232 x4 |
Watchdog Timer
|
Generates system reset; 256 levels
|
| Hardware Monitoring |
Built in Winbond W83627HF; monitors system/CPU temperature
and voltage status
|
| USB |
USB 2.0 compliant
Supports 4 USB ports
|
| IrDA |
Pin header
|
| Expansion Slots |
1 PCI, support 2 bus master
|
| Mouse Connector |
PS/2 type
|
| Keyboard Connector |
PS/2 type
|
| Digital I/O |
4 in / 4 out |
| Power Connector |
ATX 12V power connector |
| System Voltages |
+5V, +12V, -12V, 5VSB, 3.3V |
| Other Features |
Modem wakeup, LAN wakeup |
| Form Factor |
Mini ITX motherboard
|
| Dimensions |
170mm x 170mm
|
| Power Requirement |
Pentium® 4 2.4GHz (512KB) with 256MB DDR memory
+5V: 3.29A; +12V: 4.83A
Pentium® 4 3.06GHz (512KB) with 512MB DDR memory
+5V: 3.17A; +12V: 7.14A
|
| Operating Temperature |
0XC~60XC (32XF~140XF)
|
| Storage Temperature |
-20XC~80XC (-68XF~176XF)
|
| Relative Humidity |
10%~90% (non-condensing)
|
| MB870 |
Socket 478, ATI RS300M Mini ITX Motherboard, supports
CRT, TV out, LVDS |
