| IFD-250A is a high performance, embedded flash disk
drive. The IFD is a solid-state disk drive, offering new
and expanded functionality while enabling cost-effective
designs that is to replace a conventional IDE hard disk
drive, and can be plugged into a standard IDE connector
commonly found in desktop or portable PC systems. Operating
temperature supports industrial grade 0XC~70XC and extended
temperature -40XC~85XC. |
| Specifications |
| Compatibility |
Full IDE hard disk compatible |
| IDE Controller |
SST |
| Capacity |
32MB ~ 32GB (Industrial)
32MB~16GB (Wide-Temp.) |
| Temperature
Ranges |
| Industrial: |
0XC ~ 70XC for operating
-40XC ~ 100XC for storage |
| Wide-Temp.: |
-40XC ~ 85XC for operating
-40XC ~ 100XC for storage |
|
| Low Power Consumption |
Active mode: 35mA/55mA (3.3V/5.0V, typical)
Sleep mode: 100gA/150gA (3.3V/5.0V, maximum) |
| Write
Speed |
Max. 6MB/sec under PIO mode
Max. 7MB/sec under DMA mode |
| Read Speed |
Max. 10MB/sec under PIO mode
Max. 11MB/sec under DMA mode |
| Power
Cycling |
more than 3000 times |
| MTBF |
>3,000,000 hours |
| Standard
IDE Connector |
44-pin |
| Reliability |
Built-in ECC support corrects 3 bytes of error per
512byte sector |
| RoHS Compliant |
Ready |
| IFD-250A-[cap]-R20 |
2.5" Industrial IDE SST Flash Disk with [cap],
RoHS |
| IFD-250AW-[cap]-R20 |
2.5" Wide-Temp. IDE SST Flash Disk with [cap],
RoHS |
Note:
[cap]: Capacity
Industrial: 32MB, 64MB, 128MB, 256MB, 512MB, 1G, 2G, 4G,
8G, 16G, 32G
Wide Temperature: 32MB, 64MB, 128MB, 256MB, 512MB, 1G,
2G, 4G, 8G, 16G |
