| Specifications |
| General
Functions |
| Output Range |
| Nominal |
Min |
Rated |
Max |
| +5V |
0.2A |
10A |
15A |
| +12V |
- |
3.5A |
5A |
| -12V |
- |
0.3A |
0.5A |
| +5Vsb |
- |
0.5A |
1A |
+5V and +12V combine power max 95W,
Total output power max is 100W |
| Input Voltage |
85~264V AC
|
| Ripple and Noise |
Less than 1% of each output at rated load |
| Hold-up Time |
20ms min |
Efficiency
|
Higher than 80% |
| Protection |
Over voltage/Load protection and short circuit protection |
| Altitude |
0~10,000 ft |
| TTL signal compatible
power good signal |
| MTBF |
100.000hrs at 25¢XC |
| Vibration |
10-55Hz at 2G 3min. period, 30 min. along X, Y and
Z axis |
| Shock |
10G for 11ms once on each X,Y and Z axis |
| Safety |
UL 2601, TUV EN 60601-1,CCC, meets CE |
| EMI |
FCC docket 20780 curve "B", EN 55011 class "B", EN 61000-3-2
class "D" |
| EMC |
| - |
EN 61000-4-2 4KV contact; 8KV air discharge criterion
B-EN 61000-4-3 10V/M with 80% AM criterion A |
| - |
EN 61000-4-4 2KV criterion B |
| - |
EN 61000-4-5 Line to Line 1KV ; Line to ground
2KV criterion B |
| - |
EN 61000-4-6 10V with 80% AM criterion A |
| - |
EN 61000-4-8 30A/m criterion A |
| - |
EN 61000-4-11 30% dips 10ms , criterion B |
60% dips 100ms , criterion C >95% dips 5000ms , criterion C |
| Environmental and
Mechanical |
| Opeating Temperature |
0~70¢XC (Derating curve will occur 50¢XC~70¢XC) |
| Storage Temperature |
-40¢XC~75¢XC
|
| Dimensions |
82(W)x50(H)x127(D)mm |
| ACE-710APM |
100W Medical ATX Power Supply with PFC function |
| CB-710A |
ACE-710APM Power Supply DC Output cable set |
| CB-870D |
ACE-710/870 Power Supply AC Input cable set |
