| Specifications |
| General
Functions |
| Processor Socket |
Socket 478 |
| Processor |
P4 1.3GHz to 2.2GHz |
| Chipset |
Intel® 82845/82801BA |
| BIOS |
AMI PnP Flash BIOS |
| Bus Speed |
400MHz FSB (100MHz x 4) |
| Bus Interface
|
PICMG Bus |
| Cache Size |
256/512KB cache memory, CPU integrated |
| Memory |
Three DIMM sockets supporting up to
1.5GB |
| Onboard IDE |
Four IDE disk drives supporting ATA/33/66/100
and with transfer rates of up to 33/66/100MB/sec. |
| I/O
Chipset |
Winbond W83627 |
| Serial Port |
16C550 UART-compatible RS-232/422/485 x 1 and RS-232
x 1 serial ports with 16-byte FIFO |
| Parallel
Port |
One enhanced bi-directional
parallel port support SPP/ECP/EPP |
| Floppy Interface |
Supports up to two floppy disk drives |
| Onboard
VGA |
SiS 315 with 16MB or 32MB
memory supporting 3D display |
| Onboard LAN |
Three Intel® 10/100 Based LAN (2 x Intel® 82559 and 1
x Intel® 82562) |
| Audio |
AC97 3D audio controller |
| Onboard SSD |
One 32-pin DIP socket supports M-Systems DiskOnChip
2000 series up to 288MB |
| Watchdog
Timer |
Jumper selectable for system Reset
and NMI; Software programable time-out interrals from
1~256 sec |
| Keyboard |
PS/2 6-pin Mini DIN or 5-pin connector |
| Mouse
|
PS/2 6-pin Mini DIN |
| USB |
Supports four USB ports |
| IrDA |
One IrDA TX/RX header |
| Hardware Monitor |
Winbond W83627 |
| PC/104 |
PC/104 connector for 16-bit ISA Bus |
| CMOS |
Battery backup |
| Power
Connector |
One 4-pin and one 20-pin ATX power
connector |
| Environmental and
Mechanical |
| Power Voltage |
+5V, +12V, -12V |
| Power Consumption |
+5V@5.7A, +12V@10.3A, -12V@0.2A (P4 2.0GHz CPU, 1.5GB
DRAM) |
| Operating Temperature |
0XC to 60XC |
| Relative Humidity |
5% to 90% |
| Form Factor |
Full-size, PICMG Bus |
| Dimensions |
13.3" (L) x 4.8" (W) (336mm x 121mm) |