| Features |
|
ULV Intel® Celeron® M processor 600MHz/512K |
|
One SO-DDRII socket with a max. capacity of 1GB |
|
Intel® 852GM GHCH/ICH4 chipset |
|
Winbond W83627HF super I/O chipset |
|
Intel® 82852GM graphics controller |
|
LVDS Panel display interface |
|
Intel® 82562ET and 82551ER fast Ethernet controller |
|
AC97 3D audio controller |
|
Fast PCI ATA/33/66/100 IDE controller |
|
CompactFlash card adapter, two COM, three USB2.0 ports |
|
Hardware Monitor function |
| Specifications |
| CPU |
ULV Intel® Celeron® M processor 600MHz/512K |
| Bus Interface |
PCI-ISA Bus (no 3.3V output through goldfinger) |
| Memory |
One DDR socket supporting up to 1GB |
| Chipse |
Intel® 852GM GHCH/ICH4 chipset |
| I/O chipset |
Winbond W83627HF |
| CompactFlash |
One, Type I/II IDE interface adapter |
| VGA |
Intel® 82852GM for CRT display or CHRONTEL 7301 for DVI-I display, supporting up to 1600 x 1200 (DVI-I and CRT connector is optional) |
| LVDS Panel |
Supports 18-bit single channel/36-bit dual channel LVDS interface |
| Ethernet |
IntelR 82562ET and 82551ER 10/100 Based LAN |
| Audio |
AC97 3D audio controller |
| IDE |
Two 2.54-pitch 40-pin IDE connectors |
| FDD |
Supports up to two floppy disk drives |
| Serial Port |
16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 1 serial ports with 16-byte FIFO |
| USB |
Three USB2.0 ports, two internal and one external |
| Keyboard/Mouse |
PS/2 6-pin Mini DIN
(optional)
or 6-pin header |
| BIOS |
AMI PnP Flash BIOS |
| Watchdog Timer |
Software programmable time-out intervals from 1~256 sec. |
| CMOS |
Battery backup |
| Power Connector |
One 4-pin power in connector |
| Temperature |
0~+60°C (operating); -20~+80°C (storage) |
| Hardware Monitor |
Winbond W83627HF |
| Dimensions |
18.6(L) x 12.2(W) x 4.2(H) cm |
| HS-7250M |
ULV Intel® Celeron® M processor (w/Heatsink) SBC w/CF, CRT/LVDS, Audio, Dual LAN, 2C/485 & USB2.0 |
| HS-7250MDVI |
ULV Intel® Celeron® M processor (w/Heatsink) SBC w/CF, DVI-I, Audio, Dual LAN, 2C/485 & USB2.0 |
| 291-13010020 |
Y-cable for CRT & DVI-I use |