Google ATTRO website www
 
   
 
Full size PIAGP Bus
Full size PICMG 1.3
Full size PICMG 1.0
Half size PICMG 1.3
Half size PISA Bus
Half size ISA Bus
Half size PCI Bus
       

P4BVLL
Pentium 4 AIO PICMG SBC with VGA /Dual LAN

Features Specifications Ordering Info
Features
Support Pentium 4 Prescott (90nm) 2.4GHz and 2.8GHz with 533MHz FSB and 1MB L2 cache.

Dual Intel Fast Ethernet controller on board. Support TCP/IP checksum offloading to minimize CPU utilization.

Support Server-grade LAN features like Teaming and Fault-Tolerance in wire-speed.
ATI RADEON-7000M 3D Graphic engine delivers Best-in-the-class graphics performance. Independent 16MB frame buffer design gives NO impact to system memory bandwidth.
On-Board AT-P8 and ATX-12V Power connector support stand-alone system configuration.
One DVI Interface support direct drive LCD monitor with best display quality.
Support Hardware Monitor and Watch-Dog timers. System will alert administrators while abnormal operation condition happened.
Pentium-4 grade cost-effective Full-size PICMG CPU card solution.
Specifications
General Functions
CPU Socket mPGA-478 Socket
CPU Intel® Pentium® 4 Northwood and Prescott Processor, up to 3.06GHz.- FSB speed 400/533MHz Selectable by Jumpers.- Support Prescott (90nm) 2.4G and 2.8GHz with L2=1MB processor
Chipset

Intel® 845E +ICH2 Chipset

BIOS

Award ACPI BIOS on 4M-bit Flash ROM.- Flash EEPROM update utility available. - PXE & RPL Boot Agent are integrated in system BIOS

System Memory

Two 184-pin DDR DIMM sockets support DDR200 and DDR266 SDRAM.- The memory size can be up to 2.0GB in total.- Supports both ECC and non-ECC function

10/100Base-T Ethernet

Two Intel 82551GM LAN controllers- Compliant with IEEE802.3u, support IEEE 802.1Q VLAN, 802.1P priority packets, 802.1X flow control and 10/100M auto-negotiation.- Dual-LAN design for fault-tolerance and Load-Balancing networking

LAN Management DMI2.0 and WfM 2.0 (wire for management) compliant.- Supports Intel LANDesk Service Agent Rev 6.0
AGP VGA

ATI RADEON-7000M 3D chipset with 16MB SGRAM on-board.- Support AGP 4X mode operation. - One DVI I/F connector for LCD panel and DVI 1.0 support

IDE

Two Bus Master EIDE Channel support PIO Mode 3/4, Ultra DMA33/66/100 IDE HDD, ATAPI CD-ROM and LS-120 drive.- Support up to 4 devices

Super Multi I/O

Winbond W83627 Super I/O controller Support:- 1x IrDA.- 2x Serial ports. - 1x Parallel port (SPP/EPP/SCP).- 1x FDD port, support up to Floppy drives.- 1x PS2 KB and 1x Mouse

Hardware Monitoring

PC Health Monitoring ASIC on-board to monitor system power rails, FAN speed as well as CPU and system temperatures

Watchdog Timer

Programmable watchdog timer from 8~90 seconds- Timeout event can be Reset system or NMI

Power Consumption

5A @ +5V(Typical) ; 6A @ +12V (Typical); 100mA @ -12V

Form Factor

Full size PICMG 2.0 Compliant

Dimensions

338mm x 122mm (13.3"x 4.8")

Operating Temperature

0XC~60XC (32XF~140XF)

Storage Temperature

-20XC~80XC (-68XF~176XF)

Relative Humidity

10%~90% (non-condensing)

Ordering Info
P4BVLL -AIO Pentium-4 PICMG SBC with VGA/DUAL-LAN/ATI Radeon7000M, PCB Version 3.1
P4BVLL22-AIO Pentium-4 PICMG SBC with VGA/DUAL-LAN/ATI Rage128, PCB Version 2.2
CBK-USB2 Dual USB2.0 ports cable kit includes bracket
CBK-P4B-DVI DVI cable kits for DVI D-SUB connector on a bracket
 

 

 


Copyright © 2007-2008 ATTRO Technology Inc. All Rights Reserved.