| Specifications
|
| General
Functions |
| CPU |
Intel® CPU LGA775 P4 Prescott/Celeron-D support
800/533 MHz FSB up to 3.8GHz with Hyper-Threading Technology. |
| System
Chipset |
Intel® 915GV + ICH6 |
| BIOS |
AMI Flash BIOS
SMIBIOS (DMI) compliant
Console redirection function support
PXE (Pre-Boot Execution Environment ) support USB booting
support |
| System
Memory |
4 x DDRII 240-pin sockets of 533/400MHz
DDR SDRAM up to 4GHz |
| Ethernet |
Dual Marvell 88E8053 |
| I/O Interface |
2 x RS-232 by 2 x 5 pin header
1 x LPT by 2 x 13 pin header
1 x IrDA by 1 x 5 pin header
1 x USB connector
6 x USB 2.0 by 2 x 4 pin header
4 x SATA-150 connectors
1 x FDD by 2 x 17 Pin header
1 x PS2 Keyboard / Mouse
2 x 5 Pin header for 4 input/4 output GPIO |
| Graphic Controller |
Intel® Graphics Media Accelerator 900
Silicon Image SIL1362CLU SDVO -> DVI
|
| Watchdog
Timer |
Software programmable supports 1 ~
255 seconds system reset |
| Environmental
and Mechanical |
| Power Supply |
4 pin ATX 12V, 20 pin ATX Power on PICMG1.0 backplane
|
| Power
Consumption |
+5V 3.86A, +12V 5.21A (P4-3.4GHz/2M/800,
1GB DDRII 533 x 2) |
| Operating Temperature |
0XC to 60XC (32 ~ 140XF) |
| Relative
Humidity |
5-95%, non-condensing |
| Dimension |
338(W)mm X 122(L)mm |
| Weight
|
GW: 1.2Kg |
| WSB-9154-R10 |
PICMG 1.0 LGA775 Intel Pentium4/ Celeron-D CPU Card
with VGA, Dual GbE and SATA |
WSB-9154DVI-R10
|
PICMG 1.0 LGA775 Intel Pentium4/ Celeron-D CPU Card
with VGA, Dual GbE, SATA and DVI function |
