| Specifications |
| CPU |
 |
Intel® Pentium® 4 Prescott processor
- Hyper-Threading Technology
- 800MHz/533MHz system data bus |
|
Processor socket: Socket 775 |
|
| Chipset |
|
Intel® 915GV chipset
- Intel® 915GV Express chipset
- Intel® 82801FB I/O Controller Hub (ICH6) |
|
| System Memory |
|
Four 184-pin DDR SDRAM DIMM sockets |
|
Supports dual channel (128-bit wide) memory interface |
|
Unbuffered PC3200 (DDR400) or PC2700 (DDR333)
DDR SDRAM DIMM |
|
Supports maximum of 4GB system memory up to 512Mbit
technology for x8 and x16 devices, non-ECC memory
|
|
| BIOS |
|
Award BIOS |
|
4Mbit flash memory |
|
| Power Management |
|
Supports ACPI specification and OS Directed Power
Management |
|
Supports ACPI STR (Suspend to RAM) function |
|
Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse
- Wake-On-USB Keyboard/Mouse
- Wake-On-LAN
- Wake-On-Ring
- RTC timer to power-on the system |
|
System power management supported |
|
CPU stopped clock control |
|
Microsoft®/Intel® APM 1.2 compliant |
|
Soft Power supported - ACPI v1.0a specification |
|
AC power failure recovery |
|
| Hardware
Monitor |
|
Monitors CPU/system temperature and overheat alarm |
|
Monitors +1.5V/+3.3V/VCCP/VTT voltages and failure
alarm |
|
Monitors CPU/chassis fan speed and failure alarm |
|
Read back capability that displays temperature,
voltage and fan speed |
|
Watchdog timer function |
|
| Audio |
|
Realtek ALC655 |
|
18-bit stereo full-duplex codec with independent
variable sampling rate |
|
High quality differential CD input |
|
True stereo line level outputs |
|
S/PDIF-in/out interface |
|
5.1-channel audio output |
|
| LAN |
|
Marvell 88E8053 Gigabit ethernet controller |
|
Supports 10Mbps, 100Mbps and 1Gbps data transmission |
|
IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps)compliant
|
|
| Graphics |
|
Graphics memory
- Shares 1MB/8MB of the system memory in DOS mode
- Uses Dynamic Video Memory Technology (DVMT) in
Windows mode |
|
Graphics controller
- Core frequency of 333MHz
- 400MHz integrated 24-bit RAMDAC
- Analog display up to 2048x1536 @ 85Hz refresh
- High quality 3D setup and render engine - Discrete,
Triangles, Strips and fans
- Hardware Pixel Shader 2.0
- Supports D3D and OGL pixelization rules
- Per pixel perspective corrected texture mapping
- 533 MegaTexel/sec performance, 266 Mpixels/sec
fill rate up to two bilinear textures |
|
2D graphics features
- Optimized 256-bit BLT engine
- 32-bit alpha blended cursor
- Programmable 3-color transparent cursor |
|
3D graphics features
- Supports maximum 3D resolution: 1600x1200x32 @
85Hz
- Flat and Gouraud shading
- 16- and 24-bit Z-buffering and 8-bit Stencil buffering
- Vertex and programmable pixel fog and atmospheric
effects |
|
Software drivers
- Windows® 2000/XP |
|
| Serial
ATA |
|
Supports four SATA (Serial ATA) interfaces which
are compliant with SATA 1.0
specification (1.5Gbps interface) |
|
| IDE |
|
Supports up to UltraDMA 100Mbps hard drives |
|
PIO Mode 4 Enhanced IDE (data transfer rate up
to 14MB/sec.) |
|
| AGP |
|
PCI 2.2 and AC 97 compliant |
|
| Rear Panel I/O
Ports |
|
1 mini-DIN-6 PS/2 mouse port |
|
1 mini-DIN-6 PS/2 keyboard port |
|
1 DB-25 parallel port |
|
1 DB-9 serial port |
|
1 DB-15 VGA port |
|
1 RJ45 LAN port |
|
4 USB 2.0/1.1 ports |
|
Mic-in, line-in and line-out |
|
| I/O Connectors |
|
2 connectors for 4 additional external USB 2.0/1.1
ports |
|
1 connector for 1 external COM port |
|
1 front audio connector for line-out and mic-in
jacks |
|
1 CD-in internal audio connector |
|
1 S/PDIF-in/out connector |
|
1 connector for IrDA interface |
|
4 Serial ATA connectors |
|
1 40-pin IDE connector |
|
1 floppy connector |
|
1 24-pin ATX power connector |
|
1 4-pin 12V power connector |
|
1 front panel connector |
|
2 fan connectors |
|
1 chassis open connector |
|
| Expansion Slots |
|
7 PCI slots |
|
| PCB |
|
4 layers, ATX form factor |
|
30.5cm (12.05") x 24.4cm (9.6") |
|
