| Specifications |
| General
Functions |
| CPU Socket |
Socket-478 |
| CPU Type |
Intel P4 / P4-M / Celeron |
| FSB |
400/533 MHz |
Chipset
|
Intel 852GME + ICH 4 |
| Memory |
2X 184-pin DDR 266/333 SDRAM up to 2GB ECC support
|
| Display |
Display controller
Intel GMCH Integrated Graphics controller
Integrated AGP 4X 2D/3D engine
One VGA port for CRT monitor 1600x1200@8bpp
1280X1024@16bpp
DF14-30F connertor for 48-bit LVDS I/F
DVI-I port with Silicon Image Sil164 (Optional)
Dual independent displays Shared system memory up to
32MB (DVMT)
|
| Ethernet |
Intel 82541ER for 10/100/1000Mbps Ethernet |
| I/O Interface |
2 x ATA-100 IDE port
1 x FDD port supports 1.44/2.88MB and 3-mode floppy drive
1 x LPT (Supports SPP/EPP/ECP mode)
2 x PS2 Keyboard/Mouse support
3 x RS-232 Serial port
1 x RS-232/422/485 selectable
6 x USB 2.0 port (4 by connector, 2 x power USB with 12VDC
shared 2.5A)
1 x IrDA by pin header (SIR mode) |
| Audio |
AC'97 Codec |
| Digital
I/O |
4 inputs / 4 outputs |
| WDT |
Software programmable support 1 ~ 255 sec system reset |
| Expansion
slot |
1x PCI slot
1x Em-ATX riser card connector
1x WIM IPMI Socket |
| Hardware Monitor |
CPU voltage / Temperature / FAN speed monitor |
| Power
control function |
Meets ACPI 1.1 |
| Operation Environment |
Temperation Range 0XC to 60XC
Relative Humidity 5 ~ 95%, non-condensing
|
| ICPMB-7760GN-R10 |
Embedded ATX MB socket 478 Pentium 4/ Pentium 4-M/
Celeron with 400/ |
| WIM-HT68-01(Option) |
Wellsyn IPMI module Hitachi H2168 BMC |
| CF-514 (Option) |
High performance Skiving Pentium® 4 CPU cooler
|
